Testing And Measuring Instruments

Pioneers in the industry, we offer foaming characteristics apparatus and ohmcorr test system resistivity meter from India.

Foaming Characteristics Apparatus

REQUEST CALLBACK

Ask for Price

Product Price :Get Latest Price

Manufactured in conformity with ASTM D892, IP 146 and JIS K2518, and used for measuring the foaming characteristics of lubricating oils at specified temperature. Manufactured in conformity with ASTM D892, IP 146 and JIS K2518, and used for measuring the foaming characteristics of lubricating oils at specified temperature.

Specification

Testing Method ASTM D892, IP 146 and JIS K2518
No. Of Bath 2 nos.
Low Temp. Bath 24 DegreeC (An auxiliary cooler is required)
High Temp. Bath 93.5 DegreeC
Temp. Control P.I.D. control
Temp. Accuracy +-0.2 DegreeC
Temp. Display Digital display 4 lines / 0.1 division
Temp. Detector Platinum resistance probe (PT1000)
Heater 800 W (Low temp. bath)
1.1 kW (High temp. bath)
Agitator By motor driving Propeller stirring
Illumination of Bath Fluorescent lamp, 10 W
Blower 6 L / min
No. Of Flow Meter 2 Nos. (Cat.No.330-022-2)
Flow Meter Range 94 +- 5 ml
Safety Device E.L.B. (Electric Leakage Breaker), Anti-over-heating, Anti-dry heating
Power Supply AC 220 V 50 Hz, single-phase, 2.0 kW
Overall Dimensions 850(W) x 400(D) x 635(H) mm
Weight Approx. 40 kgs

Standard Accessories

Graduated cylinder 2 set
Diffuser stone 2 pcs
Thermometer -20 To 102 DegreeC, SG42/12C 2 pcs

Optional Accessory

An auxiliary cooler (Circulating Type Constant Low Temperature Bath, Model TRL-108E)
Cylindrical stainless diffuser

Yes! I am Interested

OhmCorr Test System Resistivity Meter

REQUEST CALLBACK

Get Best Quote

Approx. Rs 1,85,000 / PieceGet Latest Price

Resistivity meter to assess corrosion currents in concrete
Product Information Features & Benefits• Assesses damaging corrosion currents in concrete.• Economic and easy to use.• Direct digital readout of resistivity. Measuring fromtwo small holes avoids the problems and errors ofsurface measurements.• Used in conjunction with CorMap™ System to produceresistivity plotsThe James OhmCorr™ assesses concrete resistivity.OhmCorr™ has two probes spaced 1.97” (5cm) apart which are placed in holes drilled to a depth of 3/8th” (8mm) and filled with conductive gel. The direct digital read-out of resistivity is displayed on the LCD when the control switch is activated.The James OhmCorr™, when used in conjunction with theJames CorMap™ System provides an economic and soundmeans of diagnoses of corrosion in reinforced concrete.

SpecificationsWeight complete in carrying case8 lbs (4 kilos)Display: 4-1/2 Digit in LCDResolution: ± 0.1K ohms cm (± 1 Digit)Range: 0.5 - 20K ohms cmBattery 9 Volt
C-RM-8000 OhmCorr™ Test System Resistivity Meter

Additional Information: